Fig. 01
Horizontal radius
Turns the ladder rack left or right.
- Width
- 12 to 42 in
- Angle
- 30° · 45° · 60° · 90°
- Bend radius
- 12 in · 24 in · 36 in
Products
Ladder Rack
Aluminum ladder rack available in three side rail heights, with a full range of fittings, splices and accessories for complete systems.
01 · Straight sections
Three dimensions. Built to your spec.
Choose the side rail height, width and rung spacing you need. Adjust the options below to see the section update to scale.
Straight section · size explorerSchematic drawn to scale
Straight section, 5 in side rails, 24 in wide, rungs every 9 in.
Mill finish is standard; custom finishes on request. Ladder rack material is 0.060–0.080 in aluminum. Straight sections come in 6, 12 and 24 ft lengths, with solid rungs or pre-cut tie-down holes.
02 · Fittings
Turn, branch and change width.
Every fitting is specified by side rail height and the widths it joins. Radius fittings come in 12, 24 and 36 in bend radii, and wyes branch at 30°, 45° or 60°.
Fig. 02
Vertical radius
Turns the ladder rack up or down.
- Width
- 12 to 42 in
- Angle
- 30° · 45° · 60° · 90°
- Bend direction
- Inside · Outside
- Bend radius
- 12 in · 24 in · 36 in
Fig. 04
Cross
Adds branches on both sides.
- Main run width
- 12 to 42 in
- Cross width
- 12 to 42 in
Fig. 05
Reducer
Connects wider and narrower sections.
- Type
- Straight · Offset left · Offset right
- Wide end width
- 12 to 42 in
- Narrow end width
- 12 to 42 in
Fig. 06
Wye
Adds an angled branch.
- Hand
- Left-hand · Right-hand
- Main run width
- 12 to 42 in
- Branch width
- 12 to 42 in
- Branch angle
- 30° · 45° · 60°
Ladder rack · fittingsSheet 1 of 2Schematic. Not to scale.
03 · Splices and jumpers
Join the sections.
Standard splice plates join the side rails of adjoining sections. 12 in jumper cables span the joint.
Fig. 07
Splice plate
Joins the side rails of adjoining sections. Comes in pairs, one for each side rail.
- Type
- Standard
Fig. 08
Jumper cable
A #6 wire jumper that spans a joint between sections. Comes in pairs, one for each side rail.
- Length
- 12 in
Ladder rack · splices and jumpersSheet 2 of 2Schematic. Not to scale.
Ready to price a job?
Build your quote list from the products above and send it to us for pricing.